HOME PRODUCTS Teflon Bellows

custom teflon bellows

custom teflon bellows

custom teflon bellows
Teflon bellows used fluorine contained resin material and manufactured from specially processed The inability to use common metal from corrosive gases and acids, chemicals are being used for customer’s demand which style and condition. Teflon bellows made by maintain compatible of the same as KF, ISO standard size.
The feature of fluorine contained resin
Non-Sticking Teflon-coated on the surface do not stick of almost any materials.
Non-Wetting Teflon coating on the surface, water and oil non-sticking it. Therefore, surface contamination can not be easily cleaned, as well as maintenance of mechanical equipment saves time and can improve productivity.
Low Coefficient
Of Friction
In general, the speed coefficient of friction of Teflon, although slightly different, depending on the load is approximately 0.5 to 0.20. TEFLON-S, particularly the TEFLON FEP, PTFE and 40 times higher than the wear resistance is excellent.
Chemical resistance Teflon typically shows stability against all chemicals.
Only slightly is affected the alkaline metal products.
Unique electrical
properties
Teflon has higher Unique electrical properties in wide frequency, and surface resistance of maximum rate.
Cryogenic stability Most of teflon coated remain unchanged the physical characteristics under ultralow temperature.
Teflon can be used under low temperature like -260℃.
Teflon Bellows
Teflon Bellows
Teflon Bellows
Teflon Bellows
Teflon Bellows
Teflon Bellows
Teflon Bellows
Teflon Bellows
  1 /